Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

 
 
 
 
BRAIDED GLAND PACKING AND PACKING RINGS

Delmon introduce high quality braided packing for the dynamic sealing of pump shafts, valves spindles, plungers, agitators, fans etc. Uniform distribution of the packing material under operating conditions enables selective control of shaft leakage, rules out co-rotation of the packing ring and peripheral leakage.

Advantages
No compression of the packing against the shaft, wear on the shaft, shaft caller and packing, Cost savings due to prolonged service life and minimized leakage, improved plant availability, low temparature development in the sealing, no expansion of packing at the stuffing box housing section, optimum force distribution, no tilting of the packing.

  Expanded graphite packing
  Inconel wire inserted expanded graphite packing
  Iconel wire inserted glass fiber packing
  Lubricated PTFE fiber packing
  PTFE/Graphite fiber packing
  Lubricated carbon fiber packing
  Lubricated graphite fiber packing
  PTFE fiber packing
  Lubricated PTFE fiber and Aramid fiber packing
  PTFE Impregenated carbon fiber packing
  Graphite mold rings packing

DELMON DP 204

 

Flexible Graphite 'Performed' Packing Rings
Style No. DP 204 is pure graphite performed, cut or endless type packing. It is excellent in heat, chemical and radiation resistance. Use this packing in combination with style No. DP 205.

  Made by compressing spirally wrapped Graphite tapes.
  High purity of Graphite with low chloride, sulphur, fluoride, ash content etc., with no binders.
  Self lubricating packing with extremely low friction characteristics.
  Available in forms like Endless, 2 Halves Oblique Cuts & Single Oblique Cut.

Specifications
PH: 0 to 14 Temparature: 200 to 600 Pressure: 43.1MPa (440 kgf/cm) (ANSI class 2500)

   
DELMON DP 205  
Flexible Graphite 'Performed' Packing Rings-Steel
Style No. DP 205 Graphite with stainless steel wire Braided preformed, cut or endless type packing. It is excellent in heat, chemical and radiation resistance. Use this packing in combination with Style No. DP 204

  Made by compressing spirally wrapped Graphite tapes.
  High purity of Graphite with low chloride, sulphur, fluoride, ash content etc. with no binders.
  Self lubricating packing with extremely low friction charactersitics.
  Available in forms like Endless, 2 Halves Oblique Cuts & Single Oblique Cut.

Specifications
PH: 0 to 14 Temparature: 200 to 650 Pressure: 43.1MPa (440 kgf/cm) (ANSI class 2500)

Applications: Water, Superheated & Saturated Steam, all Non-oxidizing Liquids & Gases, oil, heat transfer oil, solvent, gas, LNG, strong acid, Strong alkali, high pressure & high temparature valves & pumps, cryogenic valves, high pressure gas valves.